Home › Guides › Cabinet Installation & Refacing Cost in Broward County (2026)
Cabinet Installation & Refacing Cost in Broward County (2026)
Typical cabinet install & refacing prices in Broward (2026)
| Job | Typical Broward range |
|---|---|
| Install cabinets — labor (per linear ft) | $80–$200 |
| Reface kitchen (typical) | $2,500–$7,000 |
| Cabinet hardware swap (per piece) | $5–$15 |
| Hang new wall cabinet (each) | $60–$150 |
| Open shelving (per shelf, installed) | $75–$200 |
| Built-in / custom unit | $800–$3,500 |
| Toe-kick / trim & filler work | $150–$500 |
| Remove old cabinets (per linear ft) | $10–$30 |
| Soft-close hinge upgrade (per door) | $15–$40 |
| Typical 10x10 kitchen install (labor) | $1,000–$2,500 |
These are general 2026 Broward market ranges to help you budget — not a quote. Your actual price depends on the job, access, and materials. 1st Integrity gives free written estimates.
What drives the cost
Cabinet pricing depends on scope (hanging stock cabinets vs. refacing vs. a custom built-in), linear footage, removal of the old cabinets, wall and floor condition (out-of-level walls mean more shimming and scribing), and upgrades like soft-close hinges and new hardware. Custom built-ins and intricate trim are the high end; a hardware-and-door refresh is the low end.
Reface vs. replace — the budget move
If your cabinet boxes are solid, refacing (new doors, drawer fronts, veneer and hardware) gives you a new-looking kitchen for roughly 30–50% of a full replacement — and far less mess and downtime. Replace only when the boxes are water-damaged, swollen, or falling apart. Even cheaper: just new hardware and soft-close hinges, which can modernize a kitchen for a few hundred dollars. We’ll tell you straight which level your kitchen actually needs.
When a job legally needs a licensed contractor
Cabinet installation, refacing and built-ins are license-exempt under Florida HB 735 — 1st Integrity does this across Broward. What needs a licensed trade is electrical (adding under-cabinet lighting or outlets) and plumbing (moving a sink). We handle the cabinets, shelving and trim, and refer the licensed-trade parts. Check a specific job free on our Do I Need a License? tool.
Frequently asked
How much does it cost to install kitchen cabinets in Broward?
Cabinet installation labor runs about $80–$200 per linear foot, so a typical 10×10 kitchen is roughly $1,000–$2,500 to install (the cabinets themselves are separate). Removing old cabinets adds $10–$30 per linear foot.
Is refacing cabinets cheaper than replacing them?
Yes — refacing a kitchen runs about $2,500–$7,000 versus a full replacement, because it keeps the existing boxes and updates doors, fronts and hardware. It’s the budget-friendly refresh when the boxes are sound.
Do you install cabinet hardware and soft-close hinges?
Yes — hardware swaps run $5–$15 a piece and soft-close hinge upgrades about $15–$40 per door. It’s one of the cheapest ways to make a kitchen feel new.
Is cabinet work license-exempt in Florida?
Yes — cabinet installation, refacing and built-ins are license-exempt under Florida HB 735. 1st Integrity does this across Broward; under-cabinet electrical or plumbing relocation goes to a licensed trade.
Talk to a real person
Questions on your specific job? We give free written estimates and straight answers — no upsell. Call 954-995-1028 or request a free estimate.