Home › Guides › Tile Installation Cost in Broward County (2026)
Tile Installation Cost in Broward County (2026)
Typical tile installation prices in Broward (2026)
| Job | Typical Broward range |
|---|---|
| Floor tile — installed (per sq ft) | $7–$15 |
| Wall / shower tile — installed (per sq ft) | $9–$25 |
| Natural stone — installed (per sq ft) | $10–$20 |
| Kitchen backsplash (typical) | $600–$1,500 |
| Shower surround (tile, full) | $1,500–$4,500 |
| Labor only (per sq ft) | $5–$12 |
| Tear-out old tile (per sq ft) | $2–$5 |
| Waterproofing / membrane (shower) | $300–$900 |
| Mosaic / intricate pattern (per sq ft add) | +$3–$10 |
| Typical bathroom floor (40 sq ft) | $400–$900 |
These are general 2026 Broward market ranges to help you budget — not a quote. Your actual price depends on the job, access, and materials. 1st Integrity gives free written estimates.
What drives the cost
Tile pricing tracks tile type and size (large-format and natural stone are heavier and less forgiving), layout and pattern (a straight lay is quick; herringbone, mosaics and lots of cuts are slow), surface prep and waterproofing (showers and wet areas must be waterproofed — non-negotiable in Florida), and tear-out of old tile. Wall and shower tile costs more than floor because it’s vertical, detailed work.
What a good tile job actually includes
The price difference between a cheap tile quote and a good one is almost always what you can’t see: a properly prepped, flat substrate; a real waterproofing membrane in showers and wet areas; correct layout so cuts land where they should; and sealed grout (and sealed stone). Skip the waterproofing and a Florida shower fails within a few years — mold, loose tile, rot behind the wall. When you compare quotes, ask specifically about substrate prep and waterproofing, not just the tile.
When a job legally needs a licensed contractor
Tile and stone installation are license-exempt under Florida HB 735, so 1st Integrity installs floor tile, backsplashes, shower surrounds and accents across Broward. What needs a licensed trade is the plumbing if a drain or valve has to move, and any structural change behind the wall. We tile and waterproof; we refer the plumbing. Check a specific job free on our Do I Need a License? tool.
Frequently asked
How much does it cost to tile a shower in Broward?
A full tiled shower surround runs about $1,500–$4,500 in Broward (2026), including waterproofing — the price depends on tile size, height, niches and pattern.
How much does a tile backsplash cost?
A typical kitchen backsplash runs $600–$1,500 installed, depending on square footage, tile type, and whether it’s a simple subway or a mosaic / intricate pattern.
Why is tile more expensive than vinyl plank?
Tile is labor-intensive — substrate prep, layout, cutting, setting, grouting and (in wet areas) waterproofing. It costs more per square foot than LVP but is premium and long-lasting.
Is tile work license-exempt in Florida?
Yes — tile and stone installation is license-exempt under Florida HB 735. 1st Integrity installs floor tile, backsplashes and showers across Broward; plumbing changes go to a licensed trade.
Talk to a real person
Questions on your specific job? We give free written estimates and straight answers — no upsell. Call 954-995-1028 or request a free estimate.