How to Paint a Room Like a Pro

Prep is 80% of the job

Wash off dust and grease, fill nail holes and cracks, sand smooth, and tape your edges. Spot-prime patches and any bare or stained spots. A wall that’s prepped paints fast and looks flawless; a wall that isn’t shows every shortcut under the light.

Cut in, then roll — while it’s wet

Brush a clean band along the ceiling, corners and trim (“cutting in”), then immediately roll the big areas in a W and fill it in, working into the wet cut-in so there’s no picture-frame edge. Keep a wet edge across the wall so laps don’t show.

Two thin coats, the right nap

Two thin coats level better and hide better than one heavy coat that drips and sags. Use the right roller nap for your texture — smooth walls want a short nap, knockdown wants a thicker one. Let coat one dry fully before coat two.

The Broward humidity factor

High humidity makes paint dry slowly, run, and in damp rooms peel. Paint in air conditioning, use a bath/kitchen-rated paint in wet rooms, and don’t rush the recoat. If it’s a big job, high walls, or you want it flawless, our painting crew handles it.

Frequently asked

Related